Unicoat Shades

  1. Identification of Material
    Unicoat Shades
  2. Composition / Information on Ingredients
    Combination of Acrylic Polyol, Pigments, Extenders, Solvents, additives and Polyisocyanate
  3. Hazards Identification
    Flammable. Harmful by inhalation and in contact with skin. Irritating to skin.
  4. First Aid Measures
    In case of eye contact rinse carefully and thoroughly with water and seek medical advice. In case of skin contact wipe off mechanically and wash affected areas thoroughly with soap and plenty of water. In case of irritation of the respiratory tract or swallowing, consult a doctor.
  5. Fire Fighting Measures
    Extinguishing media: CO2, Foam, Dry powder, In case of larger fires, water spray should be used.
  6. Accidental Release Measures
    Do not empty into drains. Remove sources of fire, ensure adequate ventilation / exhaust ventilation. Keep unauthorized persons away. Remove mechanically, cover residues with chemical binder or, if necessary, with dry sand and store in closed containers. Further disposal by incineration.
  7. Handling and Storage
    Keep container dry and tightly closed in a cool and well-ventilated place. The precautions required in the handling of solvents must be taken. Ensure adequate ventilation and, if necessary, exhaust ventilation when handling or transferring the product.
    Provide adequate ventilation and, if necessary, air extraction in working areas. Explosion protection required.
  8. Exposure Controls / Personal Protection
    Wear suitable protective clothing and eye/face protection. Protective gloves (of PVC or rubber) are recommended. Keep away from foodstuffs, drinks, and tobacco. Wash hands before breaks and at the end of the work. Keep working clothes separate. Change contaminated or soaked clothing.
  9. Physical and Chemical Properties
    Form : Liquid
    Colour : As per standard
    Odour : Characteristic Smell
    Initial Boiling point : Approx. 110º C
    Flash Point : > 27º C
    Solubility in Water : Insoluble as resin
    Solvent Composition   Combination of Hydrocarbons
    Resin composition : Combination of Acrylic Polyol resin
  10. Stability and Reactivity
    Hazardous decomposition products: No hazardous decomposition products when stored and handled correctly and is a stable product.
  11. Toxicological Information

    Toxicological tests carried out on another form supplied Acute toxicity:
    LD 50 Oral, rat: more than 5000 mg/kg

    Skin and mucous membrane compatibility, rabbit:
    Skin 24 hours exposure – Slightly irritant
    Eyes – slightly irritant

    Aromatic Hydrocarbons, such as xylene, irritate the skin and mucous membranes and are narcotic if inhaled in high concentrations.

    While using the usual acceptable occupational hygiene precautions, no adverse effects have been encountered, or are to be expected with products of this class.

  12. Ecological Information
    Do not allow to escape into waters, wastewater or soil.
  13. Disposal Considerations
    Dispose in a Chemical Disposal Area or in a manner that complies with the local, State and Central Regulations. May be incinerated in a suitable facility provided local regulations are observed. Do not incinerate closed containers.
  14. Manufacturer / Supplier Data
    Name
    MRF Corp Limited
    Registered Office
    826, Anna Salai, Vth Floor, Tarapore Towers, Chennai – 600 002.
    Factory
    MRF Corp Ltd
    @ Global Chemical Industries, Old No.107, New No.235, Valarpuram Village, Kancheepuram District - 602 105.
  15. Packing Details
    Available in 1ltr, 4ltrs and 20ltrs packs and are packed in tin and MS containers.

Note : The data given here is based on current knowledge and experience. The purpose of the Safety Data Sheet is to describe the products in terms of their safety requirements. The data does not signify any warranty with respect to the product’s properties.
01 January 2015, Version : 00